Drawings against specs and schedules
Ask Lintel to check that your drawings, schedules, and the project manual all say the same thing. It reads each one and flags where they don't agree.
Solutions
A · ARCHITECTURAL
For architectsA · ARCHITECTURAL
Check your whole set before it goes out.
You already know what you check before a set leaves your office. Lintel runs that review across every page for you. Give it your checklist or just ask it a question, and it reads the drawings, specs, and schedules and finds what you asked for. Every issue comes back with a link to the exact page.
Drawings vs. specsCallout checksSchedule conflicts
A · ARCHITECTURALWhy Lintel
Checking a full set by hand takes forever.
A full set runs hundreds of pages across drawings, specs, and schedules, and every callout and reference has to line up. Reviewing it by hand is slow and easy to miss. Lintel runs the same plan review automatically and flags every conflict with a citation to the exact page.
A-201 · Detail 5Flag
- Wall section calls out 5/A-501
- Sheet A-501 ends at detail 4
- The detail was never drawn
5/A-501 doesn't exist.
What it does
What you can check.
Callouts and references
Have it check that every detail callout and sheet reference actually points to something. It catches the ones pointing to sheets that were deleted or never drawn.
Your code checklist
Give Lintel the code items you check on every project, like egress widths and accessible clearances, and it runs them across the set and cites what it finds.
Against the consultant sets
Ask it to compare your backgrounds to the structural and MEP sheets and flag where the information doesn't line up.
On your sheets
What it catches on a set.
Real conflicts Lintel surfaces, each one cited to the exact page, so your team can verify it in seconds.
Conflict log05 flagged
01REF
A wall section calls out a detail on a sheet that was deleted two revisions ago.
Cited02SCHED
The door schedule lists a hardware set the project manual never defines.
Cited03CODE
A corridor is drawn narrower than its occupant load needs.
Cited04ADA
Accessible restroom clearances don't hold once the door swing and grab bars are in.
Cited05RCP
The finish schedule and the reflected ceiling plan name two different ceilings in the same room.
CitedHow it works
How a review runs.
01
Connect
Upload your set, or sync it from where you keep it.
02
Digest
Lintel takes a few minutes to read and organize every page.
03
Review
Ask Scout a single question, or run a Sweep to take your whole checklist across the set.
04
Issue
Go through the issues, each one linked to its page, and clear them before the set goes out.
See what Lintel finds in your specs.
Sign up for a quick demo call. We'll walk you through everything.